forum home kr home

Kidrobot Discussion Boards

Welcome to the best place on the web to talk about urban vinyl toys, plush, mini-figures, toy-art, toy artists, collecting, customs, & more!

It is currently Tue Jan 16, 2018 3:20 pm

All times are UTC - 5 hours [ DST ]

Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Sun Feb 14, 2016 12:49 am 

Joined: Tue Feb 09, 2016 6:36 pm
Posts: 2
Had a few questions for everyone. I'm looking to attempt my first munny but was wondering if anyone has tried fixit sculpt? I see alot of people using super sculpy, but I don't have access to any form of oven. So I was hoping some one could give me some insight.

Also I was wondering what should I get as a few starter tools for sculpting? I've never sculpted before so I'm not sure what I should start with or what they are called. I know this can be alot of preference involved but would like to here about specific tools including the name of said tool.

Normally I would run down to the local art/craft store and get stuff to experiment with, but unfortunately I'm deployed and its a little harder to figure this stuff out over here. And since I have to order everything and wait for it to get mailed out here I want to nail down a good kit so i won't get stuck ordering stuff halfway through the project.

I think I'll be ok on paint and prep as I have been painting with acrylics on canvas and random objects for a while.

Thank you in advance!
And anything you can add to this would be great!


PostPosted: Fri Mar 18, 2016 10:14 am 
User avatar

Joined: Tue Dec 04, 2007 10:38 am
Posts: 6751
Location: Atlanta, GA
The problem with material that you don't need an oven for is that the sculpting time is finite. You will mix 2 parts together and then you have a certain amount of time before it hardens. Magic Sculpt is a good one that a lot of people use. I know for a fact that Smooth On makes a similar product called Free Form Epoxy Putty but I have never used it. Hope you find something that works.

I am a 3A Legionnaire
ISO of: #1-1St Painted RealxNibbler - SDCC 2011, 2-Onell Chaos Invasion, 3 - Spectre Mini Pheyaos
My Flickr

Commissions list is open. If we've talked I have you on the list already.<---Time Lapse Video of the making of the Mega Munny Hammer Bros. <----New Video "How to Strip a Dunny"

N3rd Link Check out the new Blog and Podcast!

PostPosted: Mon May 08, 2017 9:02 am 

Joined: Sun May 07, 2017 10:33 pm
Posts: 1
If you aren't sculpting really thick amounts of clay, a heat gun or hair dryer will harden super scullery! All the clays that harden within 24 hours, while they do work, I've noticed become sponges when they dry. Meaning if someone picks it up with a hard fingernail pressed on it will leave a dent.

A set of x-across knives is always crucial and great to have one hand. Tool wise I'd go with any basic set of tools you can buy in a 5 or ten packs. The ones I always end up going back to are my basic ball ended metal tools. Just a little tool with different sized metal balls on the end for blending in places your fingers won't fit.

There's my two cents for whatever it's worth. Don't know if I'm too late or not! Have fun!!! They are great stress relievers! Sit, sculpt and clear your mind. Thank you for your service my friend.

PostPosted: Tue May 30, 2017 10:41 am 

Joined: Thu Jan 09, 2014 3:36 pm
Posts: 10
I have seen some people talk about boiling sculpy rather than baking. Worth a google search to see what the pros/cons are. I have never tried it but would recommend a cheap pot you never plan to eat from if you do.

As far as tools go, I picked up a cheap set from Harbor Freight. They aren't perfect but will do the job. ... 34152.html

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group