Worlds most DANGEROUS and POWERFUL munny COMPLETED

TacoHerder · **Joined:** Wed Jan 27, 2010 8:22 pm **Posts:** 1479

]Hello everyone. This will be the second time i have to post all this since the dang site logged me off the first time and when i went to add topic it made me re-log in. Deleting everything i wrote :evil:

So i had an extra mini munny sitting around. So i figured i would make the worlds strongest mini munny. I added a 445nm(blue) laser in the head. With the driver set at 240mA this laser is about 200-250mW. In my video the batteries are running low so its probably not pushing that much there. It worked good enough for me to show you though. Im thinking about taking this over to a 7 inch munny so i can completely hide all the laser components, even the clicker. Just have the lens poking out for you to use while focusing the beam. At 200mW this mini munny can burn dark plastics, pop dark balloons, remove your tattoo(painfully), burn thru electrical tape, light matches, burn leather and many other things. Its so strong that you MUST wear safety goggles while using this laser. Otherwise you could go blind, even if you dont get direct exposure to the eye. Overtime milking can accure to your pupils if you mess with a strong laser like this too long without safety goggles.

Since i lost my artistic touch maybe ill have it sent off to an artist for customizing. Any artist out there up to help complete the worlds strongest mini munny

This is definitely a WIP, so bare with me. Finish product should look pretty cool. Here are a few pics. Later i will post some pretty cool beam shots of it. For now these will due.

And a short video of me burning some electrical tape.
http://www.youtube.com/watch?v=9rssDSmu ... e=youtu.be

BTW here is how the laser looked before i took it apart.

dimply_gecko · **Posted:** Sun Apr 15, 2012 12:46 am

TaskOne maybe? He uses working electronics and LEDs in his customs, so should be up his ally

TO_designs · **Joined:** Sat Oct 01, 2011 8:24 pm **Posts:** 2409

that laser is sick! cant wait to see what the end product would be

TacoHerder · **Joined:** Wed Jan 27, 2010 8:22 pm **Posts:** 1479

I have a 7 inch GID munny at home. Might figure out how to use that for the final figure. Just think, make it GID and has a laser beam coming out an eyeball. Might look pretty sick.

TacoHerder · **Joined:** Wed Jan 27, 2010 8:22 pm **Posts:** 1479

OK folks i pretty much have this guy completed. I took my 7inch GID mini munny this time. Didnt like the lack of space in the other one. Also i changed out the driver, this sucker is now a 1W laser :badgrin:

You know those lasers you buy to play with animals? The cheap ones with the key chains and little red dots... Those are 5mW, mines 1000mW

I Made all the components fit inside the munny. The only thing you can see is the focus extender. Even the switch is hidden. I actually rigged the right arm to be the switch. To turn it on/off you twist the arm up or down. Not sure if i want to finish this design or make a new one. I would make a new one and then enter it for the munnyworld competition. BUT i really dont want anyone to turn it on and blind someone :oops:

Not to mention it doesnt really meet the FDA standards for a portable laser(like i really care about that :roll:

) Anyways, so what do you think about this munny? Think its the worlds most DANGEROUS and POWERFUL munny

I made a short video of how it works and me burning my wallet for yall :partyman:

MONEY SHOT!

and here is the video
http://www.youtube.com/watch?v=c-jMmvzz ... e=youtu.be

MinusOneMoose · **Posted:** Thu Apr 19, 2012 3:45 am

IMO - I dont like it, but I am going to try to be constructive!

I dont think the laser actually adds anything to the design and the design is essentially an Arkiv Instant drawn on a munny (it does work well though). So designwise, it needs some work.

Technical wise, you did well to transfer the Arkiv design onto a munny and it works, but the paint job could be better, you got some odd stuff going on with the paint on the arms and some mucky fingerprints on the hands. Considering 99.9% of the time the laser would be off, the arm is in the most unnatural position when the laser is off.

My main feedback would be that its ok as a novelty but I don't really see much in the design, its someone else's character with an excessively powerful laser in its head.

TacoHerder · **Joined:** Wed Jan 27, 2010 8:22 pm **Posts:** 1479

Ya the design is old and not finished. I think i painted that like 2 years ago. Never finished the arms so the crappy black i used smudges when you touch it. I'll probably take off all the paint anyways and either send it off to an artist or just leave it blank. Only reason i even used that figure is b/c it was the only one i had spare to mess up. Didnt really want to go buy a foomi to basically put $100 worth of technology in it to sit. Also the arm can be put down or slightly forward, just didnt have it that was in the pics.

BTW a lot of those smudges or dots are not the munny itself. Rather my camera has some dark spots in areas. Thanks to a laser ray damaging it..

Kidrobot Discussion Boards

Worlds most DANGEROUS and POWERFUL munny COMPLETED

Who is online